2895 3rd St, San Francisco, CA 94107, USA
Mon. - Sat. 9:00 am - 5:00 pm
HomeShopNew Dodge Parts & AccessoriesAuthentic Mopar Performance Cold Air Intake 3.6L

Authentic Mopar Performance Cold Air Intake 3.6L

$399.99

Description

Cold Air Intake System (3.6L)

 

The Mopar Cold AirIntake System increases airflow by as much as 20%, boosting torqueup to ten lbs., and power by nearly ten horsepower. All of this while improving fuel economy (one to two mpg depending on driving style). Air filters are high-flow and low-restriction, offer better throttle response and increased filtration and horsepower. Filters are made of a new dry media material which is washable and reusable.

 

NOTES:

  • Fits 3.6L Engine
  • Image is a general representation used to identify the type of product offered.

Vehicle Fitment

This product fits the following vehicles:

YEAR MAKE MODEL
2018 Dodge Charger
2017 Dodge Charger
2016 Dodge Charger
2015 Dodge Charger
2014 Dodge Charger
2013 Dodge Charger
2012 Dodge Charger
2011 Dodge Charger
2019 Dodge Challenger
2018 Dodge Challenger
2017 Dodge Challenger
2017 Dodge Challenger
2016 Dodge Challenger
2015 Dodge Challenger
2014 Dodge Challenger
2013 Dodge Challenger
2012 Dodge Challenger
2011 Dodge Challenger
2018 Chrysler 300
2017 Chrysler 300
2016 Chrysler 300
2015 Chrysler 300
2014 Chrysler 300
2013 Chrysler 300
2012 Chrysler 300
2011 Chrysler 300

 

Reviews

There are no reviews yet.

Be the first to review “Authentic Mopar Performance Cold Air Intake 3.6L”

Your email address will not be published. Required fields are marked *

Quick Comparison

SettingsAuthentic Mopar Performance Cold Air Intake 3.6L removeFits Dodge Charger Hellcat Rim - DG15 22x9 Chrome - Dodge Charger Wheel removeWhipple Superchargers WK-3021-30-NFT Gen 5 3.0L W185RF Supercharger Kit - No Flash Tool (2015-2017 Hemi 300, Charger, Challenger 6.4L) remove2015 - 2020 Dodge Challenger Rear Tail Light Assembly Replacement / Lens / Cover - Left (Driver) Side remove2015-2017 Dodge Challenger Hood Silencer Insulation Pad Liner OEM Mopar Genuine remove6.4L HEMI Intake Manifold for 5.7L RAM Upgrade Kit remove
NameAuthentic Mopar Performance Cold Air Intake 3.6L removeFits Dodge Charger Hellcat Rim - DG15 22x9 Chrome - Dodge Charger Wheel removeWhipple Superchargers WK-3021-30-NFT Gen 5 3.0L W185RF Supercharger Kit - No Flash Tool (2015-2017 Hemi 300, Charger, Challenger 6.4L) remove2015 - 2020 Dodge Challenger Rear Tail Light Assembly Replacement / Lens / Cover - Left (Driver) Side remove2015-2017 Dodge Challenger Hood Silencer Insulation Pad Liner OEM Mopar Genuine remove6.4L HEMI Intake Manifold for 5.7L RAM Upgrade Kit remove
ImageAuthentic Mopar Performance Cold Air Intake 3.6LAuthentic Mopar Performance Cold Air Intake 3.6LAuthentic Mopar Performance Cold Air Intake 3.6LAuthentic Mopar Performance Cold Air Intake 3.6LAuthentic Mopar Performance Cold Air Intake 3.6LAuthentic Mopar Performance Cold Air Intake 3.6L
SKU
Rating
Price$399.99$353.00$6,850.00$185.00$351.00$629.99
Stock
Availability
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
ContentCold Air Intake System (3.6L)   The Mopar Cold AirIntake System increases airflow by as much as 20%, boosting torqueup to ten lbs., and power by nearly ten horsepower. All of this while improving fuel economy (one to two mpg depending on driving style). Air filters are high-flow and low-restriction, offer better throttle response and increased filtration and horsepower. Filters are made of a new dry media material which is washable and reusable.   NOTES:
  • Fits 3.6L Engine
  • Image is a general representation used to identify the type of product offered.

Vehicle Fitment

This product fits the following vehicles:

YEAR MAKE MODEL
2018 Dodge Charger
2017 Dodge Charger
2016 Dodge Charger
2015 Dodge Charger
2014 Dodge Charger
2013 Dodge Charger
2012 Dodge Charger
2011 Dodge Charger
2019 Dodge Challenger
2018 Dodge Challenger
2017 Dodge Challenger
2017 Dodge Challenger
2016 Dodge Challenger
2015 Dodge Challenger
2014 Dodge Challenger
2013 Dodge Challenger
2012 Dodge Challenger
2011 Dodge Challenger
2018 Chrysler 300
2017 Chrysler 300
2016 Chrysler 300
2015 Chrysler 300
2014 Chrysler 300
2013 Chrysler 300
2012 Chrysler 300
2011 Chrysler 300
 

FITMENT

Make Model Year
Chrysler 300 2005-2021
Dodge Challenger 2008-2021
Dodge Charger 2006-2021
Dodge Magnum 2005-2008
Fitment is not guaranteed for vehicles equipped with upgraded or modified brakes, suspension or drive train.

SPECS

Item ID DG15-22090-5115-18C
Wheel Size 22x9
Wheel Offset 18
Bolt Pattern 5-115
Hub Size 71.5
Back Spacing 5.71
Center Caps Center cap included, Original center cap will interchange
NO FLASH TOOL INCLUDED Features: Most powerful supercharger system available Same technology that powers Dodge Drag Pak No other upgrades required, just massive power right out of the box Front entry, inverted Gen 5 3.0L Whipple twin-screw supercharger that significantly outperforms competitions 1.9L, 2.3L and 2.65L roots-type systems Integrated Crusher™ 112mm round inlet outflows smaller 90 and 93mm inlets such as other Eaton based systems Integrated Crusher™ 112mm round inlet for optional oversized throttle bodies Patent pending dual intercooler core, dual pass technology for industry leading cooling capacity giving Whipple lower air charge temps than any other positive displacement supercharger opiton Massive air-to-water aluminum bar-plate intercoolers offers more cooling than any other positive displacement system available Whipple Superchargers massive oversized intercooled air-bypass system for industry leading reduction of burst knock, other systems recirculate hot air Exclusive 3x4 rotor combo for industry leading efficency One-turn turn inlet allows for decreased induction losses when compared to rear inlet systems and 180deg bends Flat torque curve for incredible acceleration Oversized heat exchanger for incredible intercooler water temps High flow IC pump for quick recovery times No internal engine modifications required Completed installation looks factory installed Kits come complete with all necessary parts and hardware for installation Plug and play wiring with male and female connections Optional high flow air filter system High flow fuel injectors included Proven 6-rib belt system with adjustable idler system for easy belt changes and multiple pulley configurations OEM quick connect fittings for easy installation, no ugly brass or steel fittings on the SC Complete kits, Competition kits and Hot Rod kits available Available in wrinkle black, polish or any custom color Easily upgradeable with big cold air intakes and bigger throttle bodies Instant boost at the touch of the throttle 3 minute pulley changes Flash tool that allows you to read and erase codes and multiple data log features New, colder spark plugs included 1 year warranty Since 1987, Whipple Superchargers™ have been the pioneers and leaders of twin-screw supercharging. Whipple was the first to bring positive displacement technology to fuel injected, emissions legal engines. With over 30+ years of twin-screw supercharging experience, Whipple’s team have now engineered the most powerful supercharger system available today for your Hemi engines. The all new, Gen 5 supercharger systems feature the latest patent pending dual intercooler, dual pass technology for industry leading cooling capacity, massive 112mm high flowing inlet, Gen 5 3/4 rotors and upgraded belt system to give you the most advanced upgrade available today. More power per pound of boost with neck whipping torque and ear to ear grinning top end horsepower, the Whipple Supercharger system is absolutely a beast! The all-new Whipple Gen 5 supercharger system features the same technology that Dodge uses for its factory built Drag Pak program and is helping teams set new records nearly every race weekend. Not to be confused with the Gen 3 or 4, this all new supercharger features industry leading efficiency from idle to redline. All new bearings, gears, rotors and housing allow the new supercharger to spin faster, longer and safer while producing more power than any other positive displacement supercharger ever built. The new Gen 5 features an all new 3/4 rotor combination vs previous 3/5, 285 deg helix vs previous 270 deg, new bell mouth inlet, optimizied dishcarge port and increased diameter vs length for higher efficiency. The Whipple Supercharger system features new, high flow fuel injectors, billet fuel rails, oversized heat exchanger, high flow intercooler pump, all the pre-formed and fitted hoses and all the necessary wiring connectors for a easy installation. *Model years 2015-2021 and up require unlocked PCM's. Whipple includes HP Tuner unlock code with supercharger system purchase. PCM must be shipped to HP Tuners for unlock service. *Model years 2018-2021 kits include security gateway module to allow for reading/writing PCM.This part will fit the following vehicles:
Years Make Model Submodel Engine Attributes
2016 - 2016 Dodge Challenger 392 Hemi Scat Pack Shaker 6.4L V8 GAS Coupe 2-Door Automatic/Manual RWD
2017 - 2017 Dodge Challenger GT 3.6L V6 FLEX Coupe 2-Door Automatic AWD
2018 - 2020 Dodge Challenger GT 3.6L V6 GAS Coupe 2-Door Automatic AWD/RWD
2015 - 2020 Dodge Challenger R/T 5.7L V8 GAS Coupe 2-Door Automatic/Manual RWD
2017 - 2019 Dodge Challenger R/T 392 6.4L V8 GAS Coupe 2-Door Automatic/Manual RWD
2015 - 2016 Dodge Challenger R/T Plus 5.7L V8 GAS Coupe 2-Door Automatic/Manual RWD
2016 - 2016 Dodge Challenger R/T Plus Shaker 5.7L V8 GAS Coupe 2-Door Automatic/Manual RWD
2016 - 2020 Dodge Challenger R/T Scat Pack 6.4L V8 GAS Coupe 2-Door Automatic/Manual RWD
2019 - 2020 Dodge Challenger R/T Scat Pack Widebody 6.4L V8 GAS Coupe 2-Door Automatic/Manual RWD
2016 - 2016 Dodge Challenger R/T Shaker 5.7L V8 GAS Coupe 2-Door Automatic/Manual RWD
2015 - 2015 Dodge Challenger Scat Pack 6.4L V8 GAS Coupe 2-Door Automatic/Manual RWD
2015 - 2018 Dodge Challenger SRT 392 6.4L V8 GAS Coupe 2-Door Automatic/Manual RWD
2018 - 2018 Dodge Challenger SRT Demon 6.2L V8 GAS Supercharged Coupe 2-Door Automatic RWD
2015 - 2020 Dodge Challenger SRT Hellcat 6.2L V8 GAS Supercharged Coupe 2-Door Automatic/Manual RWD
2019 - 2020 Dodge Challenger SRT Hellcat Redeye 6.2L V8 GAS Supercharged Coupe 2-Door Automatic RWD
2019 - 2020 Dodge Challenger SRT Hellcat Redeye Widebody 6.2L V8 GAS Supercharged Coupe 2-Door Automatic RWD
2018 - 2020 Dodge Challenger SRT Hellcat Widebody 6.2L V8 GAS Supercharged Coupe 2-Door Automatic/Manual RWD
2020 - 2020 Dodge Challenger SRT Super Stock 6.2L V8 GAS Supercharged Coupe 2-Door Automatic RWD
2015 - 2017 Dodge Challenger SXT 3.6L V6 FLEX Coupe 2-Door Automatic RWD
2018 - 2020 Dodge Challenger SXT 3.6L V6 GAS Coupe 2-Door Automatic AWD/RWD
2015 - 2017 Dodge Challenger SXT Plus 3.6L V6 FLEX Coupe 2-Door Automatic RWD
2018 - 2018 Dodge Challenger SXT Plus 3.6L V6 GAS Coupe 2-Door Automatic RWD
2017 - 2018 Dodge Challenger T/A 5.7L V8 GAS Coupe 2-Door Automatic/Manual RWD
2017 - 2018 Dodge Challenger T/A 392 6.4L V8 GAS Coupe 2-Door Automatic/Manual RWD

FITMENT

Notes Year Make Model Trim Engine
2017 Dodge Challenger R/T 392 Coupe 2-Door 6.4L 6424CC 392Cu. In. V8 GAS OHV Naturally Aspirated
2017 Dodge Challenger R/T Coupe 2-Door 5.7L 345Cu. In. V8 GAS OHV Naturally Aspirated
2017 Dodge Challenger SRT 392 Coupe 2-Door 6.4L 6424CC 392Cu. In. V8 GAS OHV Naturally Aspirated
2017 Dodge Challenger SRT Hellcat Coupe 2-Door 6.2L 6166CC 376Cu. In. V8 GAS OHV Supercharged
2017 Dodge Challenger SXT Coupe 2-Door 3.6L 3604CC 220Cu. In. V6 FLEX DOHC Naturally Aspirated
2017 Dodge Challenger T/A 392 Coupe 2-Door 6.4L 6424CC 392Cu. In. V8 GAS OHV Naturally Aspirated
2017 Dodge Challenger T/A Coupe 2-Door 5.7L 345Cu. In. V8 GAS OHV Naturally Aspirated
2016 Dodge Challenger 392 Hemi Scat Pack Shaker Coupe 2-Door 6.4L 6424CC 392Cu. In. V8 GAS OHV Naturally Aspirated
2016 Dodge Challenger Base Coupe 2-Door 6.4L 6424CC 392Cu. In. V8 GAS OHV Naturally Aspirated
2016 Dodge Challenger R/T Coupe 2-Door 5.7L 345Cu. In. V8 GAS OHV Naturally Aspirated
2016 Dodge Challenger R/T Plus Coupe 2-Door 5.7L 345Cu. In. V8 GAS OHV Naturally Aspirated
2016 Dodge Challenger R/T Plus Shaker Coupe 2-Door 5.7L 345Cu. In. V8 GAS OHV Naturally Aspirated
2016 Dodge Challenger R/T Scat Pack Coupe 2-Door 6.4L 6424CC 392Cu. In. V8 GAS OHV Naturally Aspirated
2016 Dodge Challenger R/T Shaker Coupe 2-Door 5.7L 345Cu. In. V8 GAS OHV Naturally Aspirated
2016 Dodge Challenger SRT 392 Coupe 2-Door 6.4L 6424CC 392Cu. In. V8 GAS OHV Naturally Aspirated
2016 Dodge Challenger SRT Hellcat Coupe 2-Door 6.2L 6166CC 376Cu. In. V8 GAS OHV Supercharged
2016 Dodge Challenger SXT Coupe 2-Door 3.6L 3604CC 220Cu. In. V6 FLEX DOHC Naturally Aspirated
2016 Dodge Challenger SXT Plus Coupe 2-Door 3.6L 3604CC 220Cu. In. V6 FLEX DOHC Naturally Aspirated
2015 Dodge Challenger Base Coupe 2-Door 6.4L 6424CC 392Cu. In. V8 GAS OHV Naturally Aspirated
2015 Dodge Challenger R/T Coupe 2-Door 5.7L 345Cu. In. V8 GAS OHV Naturally Aspirated
Notes Year Make Model Trim Engine
2015 Dodge Challenger R/T Plus Coupe 2-Door 5.7L 345Cu. In. V8 GAS OHV Naturally Aspirated
2015 Dodge Challenger SRT 392 Coupe 2-Door 6.4L 6424CC 392Cu. In. V8 GAS OHV Naturally Aspirated
2015 Dodge Challenger SRT Hellcat Coupe 2-Door 6.2L 6166CC 376Cu. In. V8 GAS OHV Supercharged
2015 Dodge Challenger SXT Coupe 2-Door 3.6L 3604CC 220Cu. In. V6 FLEX DOHC Naturally Aspirated
2015 Dodge Challenger SXT Plus Coupe 2-Door 3.6L 3604CC 220Cu. In. V6 FLEX DOHC Naturally Aspirated
2015 Dodge Challenger Scat Pack Coupe 2-Door 6.4L 6424CC 392Cu. In. V8 GAS OHV Naturally Aspirated

SPECS

Condition: New
Brand: MOPAR
Manufacturer Part Number: 68184698AB
OE/OEM Part Number: 68184698AB
Superseded Part Number: 68184698AC
Certifications: OE
Fitment Type: Direct Replacement
Modified Item: No
Non-Domestic Product: No
Returns Accepted: Returns Accepted
UPC: Does not apply
Manufacturer Warranty: 2 Year
OE Spec or Performance/Custom: OE Spec
MAKE: DODGE
YEAR: 2015 2016 2017
MODEL: CHALLENGER
Upgrade your intake manifold and cold air intake for 5.7L HEMI powered RAM to a 6.4L HEMI intake!
Get the best possible air flow to your naturally aspirated 5.7L HEMI powered RAM with this upgrade kit. This product is a simple install bolt-on enhancement that will provide HP gains especially when coupled with upgraded exhaust headers and other mods.  Includes 6.4L EGR Plate!
**Please note that you will be required to extend your "active runner" actuator wiring harness to connect to the new location on the 6.4L intake manifold.
**Please note that if you do not select the injector spacers for your stock injectors, and you are choosing to use the 6.4 truck injector, this will need to be adjusted for in the tune. Tuning Required!

Product Fitment

2009 - 2019 Dodge RAM 5.L HEMI
WeightN/AN/AN/AN/AN/AN/A
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
error: Content is protected !!
Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
  • Image
  • SKU
  • Rating
  • Price
  • Stock
  • Availability
  • Add to cart
  • Description
  • Content
  • Weight
  • Dimensions
  • Additional information
  • Attributes
  • Custom attributes
  • Custom fields
Click outside to hide the comparison bar
Compare
X