K&N 71-2545 – K&N Blackhawk Air Intake Kits

K&N 71-2545 – K&N Blackhawk Air Intake Kits

$329.99

Add to wishlist

Category: New Dodge Parts & Accessories

Description
Reviews (0)

Description

Brand: K&N

Manufacturer’s Part Number: 71-2545

Part Type: Air Intake Kits

Product Line: K&N Blackhawk Air Intake Kits

UPC: 024844335500

Air Filter Type: Dry

Tube Color: Black textured powdercoated

Tube Material: Aluminum

Filter Color: Black

Air Intake Filter Material: Synthetic

Filter End Cap Color: Black

Sleeve Color: Black

Quantity: Sold as a kit.

CARB EO Number: D-269-58

Emissions: California EO Approved

Reviews

There are no reviews yet.

Be the first to review “K&N 71-2545 – K&N Blackhawk Air Intake Kits”

Quick Comparison

Settings K&N 71-2545 - K&N Blackhawk Air Intake Kits remove Dodge Challenger Hellcat A/C Cooled Heated Laguna Leather Seats remove 2019 Dodge Challenger Hellcat Redeye Type-RE Carbon Fiber Hood remove 2020-2022 Dodge Charger Scat Pack Widebody Front Bumper Cover OEM Used remove Whipple 4.5L Supercharger Tuner Kit (15-17 Challenger / Charger HC, DM, TH) remove Anderson Composites Dodge Charger Demon Style TYPE-DM Carbon Fiber Hood remove

Name K&N 71-2545 - K&N Blackhawk Air Intake Kits remove Dodge Challenger Hellcat A/C Cooled Heated Laguna Leather Seats remove 2019 Dodge Challenger Hellcat Redeye Type-RE Carbon Fiber Hood remove 2020-2022 Dodge Charger Scat Pack Widebody Front Bumper Cover OEM Used remove Whipple 4.5L Supercharger Tuner Kit (15-17 Challenger / Charger HC, DM, TH) remove Anderson Composites Dodge Charger Demon Style TYPE-DM Carbon Fiber Hood remove

Image

SKU

Rating

Price $329.99 $3,000.00 $1,098.00 $500.00 $9,999.99 $1,354.00

Stock

Availability

Add to cart

Description

Content

Brand: K&N

Manufacturer's Part Number: 71-2545

Part Type: Air Intake Kits

Product Line: K&N Blackhawk Air Intake Kits

UPC: 024844335500

Air Filter Type: Dry

Tube Color: Black textured powdercoated

Tube Material: Aluminum

Filter Color: Black

Air Intake Filter Material: Synthetic

Filter End Cap Color: Black

Sleeve Color: Black

Quantity: Sold as a kit.

CARB EO Number: D-269-58

Emissions: California EO Approved

DODGE CHALLENGER HELLCAT A/C HEATED LEATHER SEATS THEY ARE BLACK IN COLOR DODGE OEM "DARK SLATE GREY" WITH THE WHITE STITCHING SEAT TRACKS HAVE BEEN TESTED REAR SEATS ARE AVAILABLE UNDER 'SEAT PURCHASING OPTIONS' ABOVE. THESE SEATS WERE TAKEN FROM A: 2016 CHALLENGER HELLCAT WITH 1K MILES THERE ARE NO RIPS HOLES BURNS OR TEARS SEE PHOTOS BOTH SEAT TRACKS ARE INCLUDED DRIVERS SIDE IS POWERED THE PASSENGER AND DRIVERS FOLDS FORWARD AND RECLINES DRIVERS HAS POWERED LUMBAR THESE SEATS HAVE AIRBAGS BOTH SEATS ARE HEATED AND AIR CONDITIONED

SEAT CONDITION TABLE (10 BEING NEW) LEATHER 9.9 TRACKS / RAILS 9.8 STITCHING 9.9 COLOR 10 PLASTIC TRIM 9.9 MINT CONDITION.....SEE PHOTOS

THEY WILL FIT: 11-17 CHALLENGER 08-10 CHALLENGER* *USE IN 08-10 REQUIRES QUICK BRACKET SWAP, TAKES 5 MINUTES PLEASE NOTE: THESE SEATS WILL FIT OTHER DODGE/CHRYSLER MODELS. THE SEATS HAVE A PRIMARY TRACK AND A SECONDARY MOUNTING BRACKET SO USE OUR MEASUREMENTS IN THE PHOTOS TO SEE IF YOU CAN ADAPT THESE TO YOUR DODGE/CHRYSLER MODEL HOWEVER THE SRS SYSTEM AND WIRE CONNECTOR MAY BE DIFFERENT THE LAST PHOTOS SHOW THE OVERALL SEAT AND TRACK MEASUREMENTS

Type-RE (Dual Snorkel Style) carbon fiber hood for 2019 Dodge Challenger Hellcat/Redeye *Functional air scoop works with Redeye "Air-Grabber" intake system *Fits 2008-19 Challenger and 2015-19 Hellcat *2008-14 Challenger requires windshield washer modification *Mounts with OE hardware, hinges and latch *Carbon fiber hood (A side) bonded to fiberglass "skeleton" (B side) *Hoods are hand crafted and weigh approximately 29.1 lbs. (stock hood weighs 30.5 lbs.) *Small imperfections such as wavy weaves are inevitable due to the size and shape of the hood scoop. *All hoods require hood pins for safety reasons. Anderson Composites will not be liable for any damages to the product and the vehicle caused by not properly using hood pins - AeroCatch or Quic-Latch *Heat shield required *Anderson Composites does not suggest re-installing gas shocks/dampers/struts *The use of a hood prop rod is highly recommended *Hand crafted; approximate weight 29.1 lbs.

Item specifics

Condition: Used

Brand: Dodge

Type: Bumper Cover

Color: Gray

Manufacturer Part Number: Does Not Apply

Material: Plastic

Finish: Primed

Placement on Vehicle: Front

Since 1987, Whipple Superchargers™ have been the pioneers and leaders of twin-screw supercharging. Whipple was the first to bring positive displacement twin-screw technology to fuel injected OEM vehicles. With over 28 years of twin-screw supercharging experience, Whipple’s team have now engineered the most powerful intercooled twin-screw SC system available today for your Dodge Hellcat engine. With all the latest technology, the all new Whipple system makes more power than any other positive displacement supercharger system on the market giving you tire frying, neck whipping power that will give you a grin from ear to ear. The new Dodge Hellcat system features the massive 4.5 Liter twin-screw Whipple Charger which has over 88% more flow capacity then the stock 2.4L. To feed the beast, we incorporated our Crusher intake and billet 180mm super mono blade throttle body with factory electronics, 123mm mass air flow housing and true cold air intake with oversized S&B 9" filter. The new wide mouth intake manifold features a massive air-to-water intercooler, over twice the size of the factory cores for unhearald power potential. The Whipple intake manifold allows the factory fuel rails to be reutilizied and works with both short and mid length fuel injectors. The massive 4.5L is small enough for stock engines, big enough for built engines. Each kit fits the factory 90mm throttle body or you can choose the enormous big bore super-mono blade throttle body that includes factory type electronics pre-set and the capacity to flow 2750 CFM.

Whipple Features

Upgraded GEN III Rotary Group
Most powerfuel highest flow supercharger system available
Up to 1" intercooler fittings
Massive 4.5L outflows 2.65L by 55%
No cogged noisy belt to fail on jackshaft, direct driven supercharger
Integrated Crusher 180mm inlet outflows smaller 90mm inlets such as other Eaton based systems
Massive Super Mono Blade flows over 2750CFM vs stock 90mm at 1150 CFM
Massive air-to-water aluminum bar-plate intercooler offers more cooling than any other positive displacement system available
Factory sensor compatible
Plug and play electrical connectors
Factory fuel rail compatible (including factory fuel psi dampener)
Stock fuel injectors compatible
High flow fuel injectors compatible
Adjustable idler system included
Flat torque curve for incredible acceleration
No internal engine modifications required
Unique oil level sight glass for easy oil level and quality check, no dipstick to bind or misread
Plug and play wiring with male and female connections
OEM quick connect fittings for easy installation, no ugly brass or steel fittings on the SC
Available in wrinkle black, polish or any custom color
Optional carbon air tube
Instant boost at the touch of the throttle
3 minute pulley changes

NOTE: This article is basically also available in other colors (white, orange, polished, partly carbon) or with injection. If you are interested, please write to us.

Year:	2015, 2016, 2017
Car:	Dodge Challenger, Dodge Charger

Type-DM (Demon Style) carbon fiber hood for 2015-2018 Dodge Charger The Type-DM (Demon-style) will fit 2015-2018 Chargers and features a wide, aggressive air scoop across the top. The air scoop has a screen that can be removed and painted. Both of these hoods are made by skilled craftsmen and weigh approximately 23.6 lbs. These hoods are made of high quality 3k, 2x2 carbon fiber twill fabric and high-grade marine resin with UV inhibitor and mount to the factory locations with the OE hardware for optimal fitment. These carbon fiber hoods have great show quality looks with a high-luster finish.

Mesh screen is removable and paintable
Mounts with OE hardware
All hoods require hood pins for safety reasons.
Heat shield required
Anderson Composites does not suggest re-installing gas shocks/dampers/struts
The use of a hood prop rod is highly recommended
Hoods are hand crafted and weigh approximately 23.6 lbs.
Fits all 2015-18 Dodge Chargers
Type-DM (SKU # AC-HD15DGCR-DM) mounts in the factory locations
with OE hardware for the best fitment
Mesh screens are removable and paintable if desired
Hand crafted; made by vacuum infused process that provides excellent fabric-to-resin ratio
High luster show-quality finish
Made of high quality 3k, 2x2 carbon fiber fabric and marine-grade resin with UV inhibitors

Installation All products require professional installation. Buyer understands that some products may require modifications for correct fitment. Minor adjustments may be necessary as part of the normal installation process. All carbon fiber products will not sustain heavy force or weight, for they could be cracked by such force or weight. Anderson Composites has made an effort to produce all its aftermarket products to fit the original factory vehicles as closely as possible. However, some occasional prepping may be necessary for an ideal fit. The buyer needs to perform these steps to his/her satisfaction before installation. If the buyer wishes to paint the products, he or she must pre-fit the parts to the vehicle before painting to ensure proper fit. There are absolutely no returns on painted products. Hood Pins All hoods require hood pins for safety reasons. Anderson Composites will not be liable for any damages to the product and the vehicle caused by not properly using hood pins. Heat Shields: Anderson Composites requires the use of heat shields for all carbon fiber and fiberglass hoods. Heat shields help avoid pre-mature aging of the product. Anderson Composites 6-Month Appearance Guarantee The following situations are fully covered under the Anderson Composites 6-Month Appearance Guarantee: (Note that all Anderson Composites carbon fiber and fiberglass products are hand-made, and small imperfections are inevitable. Claims guilty of abusing Anderson Composites claims program will be denied immediately) Heavy cloudiness under the clear finish (which is only visible under the sun. Anderson Composites apologizes for not being able to QC every product under natural sun light) Clear finish bubble larger than 3/8 in diameter

Weight N/A N/A N/A N/A N/A N/A

Dimensions N/A N/A N/A N/A N/A N/A

Additional information