2019 Dodge Challenger Hellcat Redeye Type-RE Carbon Fiber Hood
$1,098.00
Description
Type-RE (Dual Snorkel Style) carbon fiber hood for 2019 Dodge Challenger Hellcat/Redeye
*Functional air scoop works with Redeye “Air-Grabber” intake system
*Fits 2008-19 Challenger and 2015-19 Hellcat
*2008-14 Challenger requires windshield washer modification
*Mounts with OE hardware, hinges and latch
*Carbon fiber hood (A side) bonded to fiberglass “skeleton” (B side)
*Hoods are hand crafted and weigh approximately 29.1 lbs. (stock hood weighs 30.5 lbs.)
*Small imperfections such as wavy weaves are inevitable due to the size and shape of the hood scoop.
*All hoods require hood pins for safety reasons. Anderson Composites will not be liable for any damages to the product and the vehicle caused by not properly using hood pins – AeroCatch or Quic-Latch
*Heat shield required
*Anderson Composites does not suggest re-installing gas shocks/dampers/struts
*The use of a hood prop rod is highly recommended
*Hand crafted; approximate weight 29.1 lbs.
Quick Comparison
| Settings | 2019 Dodge Challenger Hellcat Redeye Type-RE Carbon Fiber Hood remove | 426 Hemi Hellephant Style Engine 1000HP remove | SRT Hellcat Style Rear Bumper; Unpainted remove | Fits Dodge Charger Hellcat Rim - DG15 22x9 Hyper - Dodge Charger Wheel remove | Fits Dodge Charger Hellcat Rim - DG15 22x9 Chrome - Dodge Charger Wheel remove | 2015-2017 Dodge Hellcat (6.2L) Whipple 4.5L Supercharger Competition Kit- trade original supercharger for credit! remove | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Name | 2019 Dodge Challenger Hellcat Redeye Type-RE Carbon Fiber Hood remove | 426 Hemi Hellephant Style Engine 1000HP remove | SRT Hellcat Style Rear Bumper; Unpainted remove | Fits Dodge Charger Hellcat Rim - DG15 22x9 Hyper - Dodge Charger Wheel remove | Fits Dodge Charger Hellcat Rim - DG15 22x9 Chrome - Dodge Charger Wheel remove | 2015-2017 Dodge Hellcat (6.2L) Whipple 4.5L Supercharger Competition Kit- trade original supercharger for credit! remove | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Image |  |  |  |  |  |  | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| SKU | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Rating | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Price | $1,098.00 | $25,999.00 | $1,000.00 | $300.00 | $353.00 | $5,700.00 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Stock | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Availability | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Add to cart | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Description | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Content | Type-RE (Dual Snorkel Style) carbon fiber hood for 2019 Dodge Challenger Hellcat/Redeye *Functional air scoop works with Redeye "Air-Grabber" intake system *Fits 2008-19 Challenger and 2015-19 Hellcat *2008-14 Challenger requires windshield washer modification *Mounts with OE hardware, hinges and latch *Carbon fiber hood (A side) bonded to fiberglass "skeleton" (B side) *Hoods are hand crafted and weigh approximately 29.1 lbs. (stock hood weighs 30.5 lbs.) *Small imperfections such as wavy weaves are inevitable due to the size and shape of the hood scoop. *All hoods require hood pins for safety reasons. Anderson Composites will not be liable for any damages to the product and the vehicle caused by not properly using hood pins - AeroCatch or Quic-Latch *Heat shield required *Anderson Composites does not suggest re-installing gas shocks/dampers/struts *The use of a hood prop rod is highly recommended *Hand crafted; approximate weight 29.1 lbs. | 𝗘𝗫𝗖𝗟𝗨𝗦𝗜𝗩𝗘 𝗙𝗘𝗔𝗧𝗨𝗥𝗘𝗦:
Over 300HP capacity over Hellaphant 3.0L Supercharger
Over 500HP capacity over Hellcat 2.4L supercharger
Expensive porting not required to make power
Massive, dual pass, dual core intercooler technology for twice the cooling area of any other PD SC for 6.2L
Inverted design allows for oversized intercooler, each core is 2.125” thick, dual pass = 4.25” thick core
Dual in, dual out intercooler for increased water flow
112mm opening for compatibility with stock TB, 102mm, 105mm and Whipple’s 112mm
Billet rotors far superior to cast rotors for high rpm operation
¾ rotor vs 3/5, 33% lower male rotor speed
Superior profile with shorter leak path
Thrust retaining system for better bearing support
Massive air inlet for high flow (porting not required to get power)
Optional high flow cold air system
Fits stock fuel rail, stock injectors or billet Whipple -8 rails
Works with stock belt system and optional balancer options
Works with electronic bypass control
Works with stock TMAP sensors
New over bearing 5-bolt supercharger pulleys
Billet bearing plate and oil cover | Leveled-Up SRT Look. Achieve a bold SRT look when you upgrade to the SRT Hellcat Style Unpainted Rear Bumper. This rear bumper features the more muscular SRT design to give your Charger a fierce style upgrade. Additionally, this rear bumper’s robust build quality offers excellent protection, ensuring you don’t compromise on safety.
Robust Build Quality. This SRT style rear bumper starts out as high-grade polyurethane before undergoing a high-tech precision molding process based on computer-scanned measurements. This construction method provides you with a rear bumper that offers superior strength and resistance to deterioration in a lightweight form. This method also ensures an OE grade fit and finish. Lastly, this component is available unpainted and easy to finish in your vehicle’s body color.
Hassle-Free Install Procedure. This rear bumper is designed as an OE style replacement for your Charger’s factory counterpart. Minor drilling may be necessary for certain applications. Apart from this potential step, installation is a relatively hassle procedure that requires just standard hand tools. Please note that it is best to paint this component prior to installation as this will make the procedure much more efficient.
Application. This SRT Hellcat Style Unpainted Rear Bumper fits all 2015 to 2021 Dodge Challenger models.
Fitment:
| Fitment
Specs
| FITMENT
SPECS
| 2015-2017 Dodge Hellcat (6.2L) Whipple 4.5L Supercharger Competition Kit. (Note: We do accept trade in on your old working or non-working supercharger- check with us for more information.)
Confirmed fitment in place of OEM supercharger on:
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Weight | N/A | N/A | N/A | N/A | N/A | N/A | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Dimensions | N/A | N/A | N/A | N/A | N/A | N/A | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Additional information |
Reviews
There are no reviews yet.